Solar panels: care, credits & the rules
Living with rooftop solar in Tenafly: snow and cleaning, watching production, how PSE&G's net metering credits work, the warning label, and the steps for a new system.
Checked 2026-11-06. General information, summarized from the official sources listed. Rules, dates and products change, so check the sources before relying on them. Not professional, legal or safety advice: installs, gas and electrical work need a licensed pro and often a permit. Businesses are listed for convenience, not endorsed.
At a glance
- Stay off the roof: panels usually shed light snow once the sun hits them. Roof work and cleaning are for your installer.
- Watch production in your app or on the inverter, and compare with the same month last year.
- PSE&G net metering: extra power earns credits each month; once a year, leftover credits are valued at the wholesale market price, added to your account, and the bank resets.
- Since February 2025: homes with a secondary power source need a warning label within 18 inches of the main panel and the meter; ask the Bureau of Fire Prevention whether your system counts.
Snow and cleaning
- Panels are dark and tilted, so light snow usually slides off on its own once the sun is out.
- Never climb a snowy or icy roof to clear panels, and don't scrape them.
- Follow your installer's manual for cleaning and for what is safe to use on the panels.
A job for a licensed pro. Anything on the roof, from cleaning to fixing loose wires or critter guards, is a job for your installer or a licensed electrician.
Watch your production
- Check the monitoring app or the inverter's lights now and then. A system that suddenly produces much less, or shows an error, needs a look.
- Compare a month with the same month last year rather than with last month: winter output is always lower.
- Trim branches that start to shade the panels (see Trees: pruning, removal & storm damage for the borough's rules on trees).
How PSE&G's credits work
PSE&G: Your bill is based on net use. Each kilowatt-hour your panels send to the grid adds a credit to your bank, and in months you use more than you make, banked credits cover it. At the end of your 12-month year, PSE&G values any leftover credits in an "anniversary true-up", adds that to your account, and resets the bank to zero. (Source: PSE&G)
PSE&G: Leftover credits at the true-up are valued at the market price of power (based on wholesale prices), not the full retail rate. Your year usually starts when the net meter is installed; PSE&G will change the true-up month once, on request, and suggests waiting until you have a year of solar history. Residential questions: 609-227-5100. (Source: PSE&G)
Tip: PSE&G suggests a true-up month just before your panels start building up the most credits (for most homes, early spring), so fewer credits are cashed out at the lower year-end value.
The warning label
State law: Since February 3, 2025, one- and two-family homes with a secondary power source must have a label warning of it within 18 inches of the main electrical panel and the electric meter. It's enforced through the alarm certificate needed to sell or rent a home, and the fine for selling or renting without it is up to $500. (Source: New Jersey Legislature)
The law doesn't list examples. If you have solar, a standby generator or a home battery, ask Tenafly's Bureau of Fire Prevention whether your setup needs the label. Selling or renting? See the alarm certificate.
Adding a system
PSE&G: An interconnection application goes to PSE&G before construction. Your installer can file it, but you must sign it. After the work passes the construction code inspection, PSE&G inspects the system, may change the meter, and issues a Permission to Operate. Don't turn the system on until you receive it. (Source: PSE&G)
A job for a licensed pro. Solar is electrical and roof work under the state construction code. Ask the borough's Building Department which permits your project needs before you sign.