Trees: pruning, removal permits & storm damage
Prune most trees in late winter, check whether Tenafly needs a permit before you cut one down, hire a registered tree company, and leave anything near power lines to PSE&G.
Checked 2026-11-06. General information, summarized from the official sources listed. Rules, dates and products change, so check the sources before relying on them. Not professional, legal or safety advice: installs, gas and electrical work need a licensed pro and often a permit. Businesses are listed for convenience, not endorsed.
At a glance
- Late February to early March is the best time to prune many trees: you can see the structure, and pests and diseases are dormant. Oaks and elms only in winter.
- Spring-flowering trees are pruned right after they bloom. Dead branches can come off any time.
- Before removing a tree, ask Tenafly Public Works (201-568-4134) whether you need a permit. The permit covers trees 6 inches or more across; the fee depends on how many.
- Within 10 feet of a power line, don't trim it yourself: PSE&G's certified line clearance crews do that work, at no cost.
When to prune
Rutgers: Late February to early March is the best time to prune many landscape trees. Without leaves the tree's shape and weak spots are easy to see, cuts on a dormant tree cause less stress, and most disease organisms and pests are dormant too. Oaks and elms should only be pruned in winter, to avoid oak wilt and Dutch elm disease. (Source: Rutgers Master Gardeners of Hunterdon County)
- Spring-flowering trees (cherries, dogwoods, magnolias and the like): right after they finish blooming.
- Maples, birches and beeches may drip sap if cut in late winter. Rutgers says it doesn't hurt the tree; if it bothers you, prune them in late spring instead.
- Dead branches: any time of year.
- Fruit trees are pruned in the same late-winter window, but need more specific cuts for a good crop.
What to look for
- Remove broken, dead, diseased or dangling branches first. Cut diseased wood back to healthy wood, and wipe the pruners with rubbing alcohol or a 10% bleach solution between cuts.
- Where two branches rub against each other, take one out: the rubbing wounds the bark.
- Where two main stems grow in a tight V (under 45 degrees), keep the stronger one; the pair is likely to split as it grows.
- On young trees, raise low branches you need to walk or mow under a little each winter, over several years.
- Cut just outside the branch collar, the swelling where a branch meets the trunk, so the wound closes well. Keep removing suckers at the base as they appear.
Tip: Young trees: small cuts now save big saw cuts later, and stress the tree far less.
A job for a licensed pro. Branches over your head, big limbs and anything you'd need a ladder or a chainsaw for are work for a tree care company. Rutgers' advice is to call a professional.
Hiring a tree company
State law: Every business that does tree care for hire in New Jersey must be registered with the NJ Board of Tree Experts, carry the required insurance and workers' compensation, and have at least one Licensed Tree Expert or Licensed Tree Care Operator on staff. Its NJTC registration number must appear in its ads and on its vehicles. (Source: NJ Board of Tree Experts)
- Ask to see the company's registration, and the name and license number of its licensed person. A general business license or a pesticide license doesn't count.
- Check both in the Board's online licensee and business directories.
- Make sure the company is fully insured: your homeowner's policy may not cover an accident caused by an under-insured contractor.
Removing a tree in Tenafly
Borough rule: Tenafly's tree ordinance (Chapter XXVI of the borough code) regulates removing trees on private property in some cases, and Public Works issues the permits. Ask Public Works whether you need one before you cut: 201-568-4134, 107 Grove Street. (Source: Borough of Tenafly)
Borough form: The borough's permit application (revised October 2024) is for trees 6 inches or more in caliper. Fees run from $25 for one tree, $100 for 2 to 5, $200 for 6 to 10 and $375 for 11 to 20. It asks for a removal plan signed by a licensed engineer or surveyor, notice to the neighbor for trees near the property line, and possibly replanting. A dead or hazardous tree can be exempt from the fee with a tree specialist's certification. (Source: Borough of Tenafly)
- Street trees along borough streets are cared for by Public Works and can't be removed without the borough's consent.
- Landmark trees (rare, over 100 years old or of special importance) need Mayor and Council approval to remove, even on private land.
Storms and power lines
PSE&G: Stay away from downed wires and assume they're live. Don't remove trees or branches tangled in wires: report them to PSE&G at 1-800-436-7734. You can trim your own trees only if they're more than 10 feet from overhead lines; closer than that, the work is for certified line clearance contractors, and PSE&G does it at no cost. (Source: PSE&G)
- PSE&G is required by the NJ Board of Public Utilities to trim trees growing close to its lines every four years; PSE&G says the BPU requires it.
- PSE&G doesn't remove storm debris from your property. Branches can go out on garbage day; ask Public Works about larger storm cleanups.
- A borough street tree down or hanging? Call Public Works at 201-568-4134. Smaller branches from your own yard go out on garbage day; see Branches at the curb.
Tenafly businesses
Tree service and landscaping in Tenafly. Ask for the NJ tree care registration number. Listed A–Z for convenience, not endorsed.
- Beucler Tree Experts: Tree service: pruning, removal, storm work
- Latz Landscaping: Landscaping
Sources
- Rutgers Master Gardeners of Hunterdon County: Pruning trees in winter (2026)
- NJ Board of Tree Experts: Benefits of hiring a registered business
- NJ Board of Tree Experts: What consumers should look for
- Borough of Tenafly: Preservation and protection of trees
- Borough of Tenafly: Tree removal permit application (revised 10/2024)
- PSE&G: Vegetation management program (tree trimming)