Snow, snow blowers & storm generators

Clearing your sidewalk on time, using and storing a snow blower safely, and running a generator in an outage without risking carbon monoxide.

Checked 2026-11-05. General information, summarized from the official sources listed. Rules, dates and products change, so check the sources before relying on them. Not professional, legal or safety advice: installs, gas and electrical work need a licensed pro and often a permit. Businesses are listed for convenience, not endorsed.

At a glance

Your sidewalk and the street

Borough rule: Snow must be cleared from sidewalks and fire hydrants within 24 hours after it stops falling, according to the borough's New Resident Guide. The borough code has the exact rule and penalties. (Source: Borough of Tenafly)

Police non-emergency: 201-568-5100. For other borough contacts, see Who to call.

Snow blowers: choosing, using, storing

Safety (CPSC): Most snow blower injuries happen when people clear a jammed chute by hand. Stop the engine and use a stick or the clearing tool. Keep hands and feet away from moving parts. Never run it in a closed garage or shed, because of carbon monoxide. Add fuel outdoors, before starting, never to a hot or running engine. (Source: U.S. Consumer Product Safety Commission)

Generators in a power outage

Safety (CPSC): Run a portable generator outdoors only, at least 20 feet from the house, with the exhaust pointed away from doors, windows and vents. Never in the house, garage, basement, crawl space or shed, even with the doors open. Carbon monoxide from a generator can kill in minutes. Put battery CO alarms on every level and near bedrooms. (Source: U.S. Consumer Product Safety Commission)

Safety (CPSC): Never plug a generator into a wall outlet ("backfeeding"). It can send power back into the lines and electrocute utility workers or neighbors. Use heavy-duty outdoor extension cords, or a transfer switch installed by an electrician. (Source: U.S. Consumer Product Safety Commission)

Standby (whole-house) generators

A standby generator is wired into the house and usually runs on natural gas, starting on its own when the power goes out. Whatever the brand (Generac, Kohler and others), it needs regular service on the maker's schedule: oil, filters, battery and test runs.

A job for a licensed pro. Installing one is electrical and gas work. PSE&G advises having a qualified electrician size and install it, and in New Jersey the work generally needs construction permits and inspections. In Tenafly, the borough's resident guide lists generators among the permits the Building Department issues.

PSE&G: Have a qualified electrician install a generator; a permit may be required, and a self-installed one should be checked by an electrical inspector. The installer sets its distance from doors, windows and vents by the maker's specs and the code. (Source: PSE&G)

Sources

  1. Borough of Tenafly: New Resident Guide
  2. U.S. Consumer Product Safety Commission: Snow thrower safety alert
  3. U.S. Consumer Product Safety Commission: Winter storms: carbon monoxide and fire risks (2026)
  4. U.S. Consumer Product Safety Commission: Portable generator safety alert
  5. PSE&G: Generator safety
  6. Ready.gov (FEMA): Power outages
  7. Borough of Tenafly: Building Department