Filters, dryer vents & fans

Furnace filters every 60 to 90 days, lint out of the dryer every load and the vent once a year, and the fans that keep moisture down.

Checked 2026-11-06. General information, summarized from the official sources listed. Rules, dates and products change, so check the sources before relying on them. Not professional, legal or safety advice: installs, gas and electrical work need a licensed pro and often a permit. Businesses are listed for convenience, not endorsed.

At a glance

Furnace and AC filters

EPA: Choose a filter rated at least MERV 13, or as high as your system can take. Replace it as the manufacturer recommends, typically every 60 to 90 days, sooner if it looks dirty. Filters only clean the air while the system runs. (Source: U.S. Environmental Protection Agency)

  1. Find the filter slot (on the furnace or air handler, or behind a return grille) and note the size printed on the old filter's frame.
  2. Turn the system off, slide the old filter out, and put the new one in with the airflow arrow pointing toward the furnace.
  3. Write the date on the frame, or set a reminder.

Tip: Not sure your system handles MERV 13? Ask your heating technician at the yearly service.

The dryer lint filter

U.S. Fire Administration: Clean the lint filter before or after every load, and never run the dryer without it. Clean the lint that builds up around the drum and behind the dryer. The leading cause of home dryer fires is failing to clean them. (Source: U.S. Fire Administration)

The dryer vent

NFPA: Use rigid or flexible metal venting. Make sure the vent pipe isn't crushed or blocked and the outdoor flap opens when the dryer runs. Once a year, or sooner if clothes take longer to dry, clean the lint out of the vent pipe or have a vent cleaning service do it. Keep the outdoor flap clear of snow. (Source: NFPA (hosted by the U.S. Department of Energy))

A job for a licensed pro. Have dryers installed and serviced by a professional. Gas dryers should be checked by a pro so the gas line and connection are free of leaks.

Bath fans, range hoods and humidity

EPA: Run the bathroom fan or open a window when showering, and use the exhaust fan when cooking or running the dishwasher. Vent appliances like dryers outdoors. Keep indoor humidity below 60%, ideally between 30% and 50%. (Source: U.S. Environmental Protection Agency)

Fridge and water filters

Refrigerator, faucet and pitcher filters only work while the cartridge is fresh. Replace them on the schedule printed on the filter or in the appliance manual, and use a cartridge certified for what you want it to remove. For what's in Tenafly's tap water, see Veolia's yearly water quality report.

Tip: Replacement dates are easy to forget: write the date on the cartridge, or set a reminder for the day you change the furnace filter.

Tenafly businesses

Heating service and home maintenance in Tenafly. Listed A–Z for convenience, not endorsed.

Sources

  1. U.S. Environmental Protection Agency: Guide to air cleaners in the home
  2. U.S. Fire Administration: Clothes dryer fire safety (flyer)
  3. NFPA (hosted by the U.S. Department of Energy): Clothes dryer and washing machine safety
  4. U.S. Environmental Protection Agency: A brief guide to mold, moisture and your home